创意电子

标题: IT运维实战篇：NFS+Keepalived高可用集群部署discuz论坛网站 [打印本页]

作者: A随行付POS机_赵 时间: 2019-10-5 11:45
标题: IT运维实战篇：NFS+Keepalived高可用集群部署discuz论坛网站
NFS（Network File System）是一个网络文件系统，是Linux系统直接支持文件共享的一直文件系统，它允许网络中的计算机之间通过TCP/IP网络共享资源。在NFS的应用中，本地NFS的客户端应用可以透明地读写位于远端NFS服务器上的文件，就像访问本地文件一样。一般NFS为单击部署，而NFS服务器主要用于存放企业重要数据，此时为了能保证数据的安全可靠，需要对NFS服务器实现同步+keepalived高可用满足企业业务需求，如下为NFS+keepalived高可用架构实现步骤：
系统环境：Centos6.9
架构：
LAP+Discuz+MYSQL+NFS+Keepalived
LAP：192.168.8.2
LAP1：192.168.8.3
MYSQL：192.168.8.5
NFS+Keepalived（主）：192.168.8.9
NFS+Keepalived（备）：192.168.8.10
实战操作如下：
LAP端跟LAP1端，执行以下命令
[root@localhost ~]# yum -y install httpd httpd-devel php php-mysql php-devel nfs-utils
MYSQL端，执行以下命令
[root@localhost ~]# yum -y install mysql mysql-devel mysql-server
NFS（主）端和NFS（备）端，执行以下命令
[root@localhost ~]# yum -y install gcc gcc-c++ wget nfs* unzip
NFS（MASTER）端
1）下载Discuz论坛包
[root@localhost ~]# wget -c http://download.comsenz.com/DiscuzX/3.4/Discuz_X3.4_SC_UTF8.zip
2）解压论坛包
[root@localhost ~]# unzip Discuz_X3.4_SC_UTF8.zip
3）创建共享目录，拷贝论坛代码到共享目录
[root@localhost ~]# mkdir -p /data/www
[root@localhost ~]# cd upload/
[root@localhost upload]# cp -a * /data/www

1

4）创建NFS配置文件，启动NFS服务
[root@localhost upload]# echo "/data/www *(rw,sync,no_root_squash)" >/etc/exports
[root@localhost upload]# cat /etc/exports
[root@localhost upload]# service rpcbind start
[root@localhost upload]# service nfs start

2

MYSQL端
1）启动MYSQL服务
[root@localhost ~]# service mysqld start
2）进入MYSQL命令行终端
[root@localhost ~]# mysql
3）创建Discuz库并授权
mysql> create database discuz charset=utf8;
mysql> grant all on discuz.* to bbs@'192.168.8.2' identified by '123456';
mysql> grant all on discuz.* to bbs@'192.168.8.3' identified by '123456';
mysql> flush privileges;

3

LAP端
1）查看NFS服务器挂载情况
[root@localhost ~]# showmount -e 192.168.8.9
2）挂载NFS服务器共享目录到Apache发布目录（/var/www/html）
[root@localhost ~]# mount -t nfs 192.168.8.9:/data/www /var/www/html
[root@localhost ~]# df -h

4

3）启动Apache服务
[root@localhost ~]# service httpd start
4）打开浏览器访问本机IP，配置Discuz论坛

5

5）点击我同意，出现如下图

6

6）授权
[root@localhost ~]# cd /var/www/html/
[root@localhost html]# chmod o+w config/ data/ uc_* -R

7

7）点击下一步

8

8）输入数据库服务器地址、数据库名、数据库用户名、数据库密码，点击下一步

11

论坛搭建成功~~~~
LAP1端
只需使用mount命令即可
1）挂载NFS服务器共享目录到Apache发布目录（/var/www/html）
[root@localhost ~]# mount -t nfs 192.168.8.9:/data/www /var/www/html
[root@localhost ~]# df –h
2）启动Apache服务
[root@localhost ~]# service httpd start

12

3）打开浏览器访问本机IP，如下图

13

NFS+Keepalived（主）部署
1）安装keepalived所需要的依赖包
yum -y install openssl openssl-devel popt-devel kernel-devel gcc gcc-c++ libnl libnl-devel libnfnetlink-devel popt wget
2）下载keepalived软件包
wget -c http://www.keepalived.org/software/keepalived-1.2.15.tar.gz
3）解压
tar zxf keepalived-1.2.15.tar.gz
cd keepalived-1.2.15
4）预编译keepalived
./configure --prefix=/usr/local/keepalived --with-kernel-dir=/usr/src/kernels/2.6.32-696.16.1.el6.x86_64
5）编译、安装keepalived
make && make install
6）创建软连接，拷贝相应的文件
ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d
chkconfig --add keepalived
chkconfig keepalived on
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
7）编辑keepalived（主）配置文件
编辑vim /etc/keepalived/keepalived.conf，配置内容如下
! Configuration File for keepalived
tglobal_defs {
tnotification_email {
[email protected]
tttt}

notification_email_from [email protected]
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_script chk_nfs {
script "/data/shell/check_nfs.sh"
interval 2
weight 2
t}
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 51
mcast_src_ip 192.168.8.9
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.8.99
}
track_script {
chk_nfs
t}
}
保存退出，启动keepalived服务
[root@localhost ~]# service keepalived start

14

NFS+Keepalived（备）部署
1）创建共享目录
[root@localhost ~]# mkdir -p /data/www
2）拷贝NFS服务器（主）论坛代码
[root@localhost ~]# scp -r [email protected]:/data/www/* /data/www
3）创建NFS配置文件
[root@localhost ~]# echo "/data/www *(rw,sync,no_root_squash)" >/etc/exports
4）安装keepalived所需要的依赖包
yum -y install openssl openssl-devel popt-devel kernel-devel gcc gcc-c++ libnl libnl-devel libnfnetlink-devel popt wget
5）下载keepalived软件包
wget -c http://www.keepalived.org/software/keepalived-1.2.15.tar.gz
6）解压
tar zxf keepalived-1.2.15.tar.gz
cd keepalived-1.2.15
7）预编译keepalived
./configure --prefix=/usr/local/keepalived --with-kernel-dir=/usr/src/kernels/2.6.32-696.16.1.el6.x86_64
8）编译、安装keepalived
make && make install
9）创建软连接，拷贝相应的文件
ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d
chkconfig --add keepalived
chkconfig keepalived on
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
10）编辑keepalived（主）配置文件
编辑vim /etc/keepalived/keepalived.conf，配置内容如下
! Configuration File for keepalived
global_defs {
notification_email {
[email protected]
}
notification_email_from [email protected]
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_script chk_nfs {
script "/data/shell/check_nfs.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 51
mcast_src_ip 192.168.8.10
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.8.99
}
track_script {
chk_nfs
}
}
保存退出~~~
11）启动keepalived服务、NFS服务
[root@localhost ~]# service keepalived start
[root@localhost ~]# service rpcbind start
[root@localhost ~]# service nfs start
12）LAP端跟LAP1端分别重新挂载NFS共享目录（VIP），执行以下命令
[root@localhost ~]# umount /var/www/html
[root@localhost ~]# mount -t nfs 192.168.8.99:/data/www /var/www/html

15

13）分别访问LAP和LAP1

17

14）分别在NFS主和备机器上编写主备切换脚本，实现当主（备）的NFS服务宕机自动切换到备（主）机器上
[root@localhost ~]# mkdir -p /data/shell
[root@localhost ~]# vim /data/shell/check_nfs.sh，脚本内容如下
#!/bin/bash
#auto check nfs process
NUM=`ps -ef |grep nfs|grep -v grep|grep -v check|wc -l`
if
[[ $NUM -eq 0 ]];then
/etc/init.d/keepalived stop
fi
[root@localhost ~]# chmod o+x /data/shell/check_nfs.sh
15）实验测试
正常运行，VIP在NFS主机器上，当NFS服务器宕机之后自动漂移到备机器上，如下图

19

16）但是打开论坛是出现403，如下图

20

17）需要umount /var/www/html，再执行mount -t nfs 192.168.8.99:/data/www /var/www/html，chmod o+w data/ config/ uc_* -R即可

21

到此结束，谢谢支持

欢迎光临创意电子 (https://wxcydz.cc/)